Quayside Nautical Outdoor Wall Light

Brighten up the exterior of our home with our Cream Quayside Wall Mounted Light for indoor or outside use IP44 rated. This is a selection of lighter colours for the aluminium Quayside wall light with matching glass protector, It can be used inside or externally, and is available in a choice of paler colours to ensure your Quayside wall mounted lamp matches your existing home decor, be it inside or out! 

Matching Quayside Pendant Light

A corner mounting bracket is available in matching colour.

Images: We do not yet have images for all the new colours, so some images show the colour on other fittings.

Dark versions Red | Blacks | Greys available on this Quayside listing

For internal or external use, needs installation, rated IP44, 60 watt takes a standard E27 screw fitting bulb or 9 W low energy LED bulb.

Note: Requires fitting by electrician, as installations vary depending on location mounting screws and terminal blocks not supplied

Size: 32 cm dia (over shade), 38 cm high (Top of main light - bottom of glass dome) 42 cm Overhang Matching pendant version available

Select the type of light bulb you would like: 

• Pearl LED bulbs are good for outdoor lights, and a 5 watt LED will give plenty of light for most walkways outside.
• If your light will only take a lower wattage, we will provide the correct version.
• Edison Antique are good for brass finished or decorative lights.
• Dimmable LED Bulbs need an LED dimmer

	Clear Filament LED 6W E27 Bulb (60 watt)  + £7.90
	LED 9W Pearl E27 Bulb (60 watt)  + £6.90

Cornonavirus Extended Delivery - Reduced staffing at the factory is causing delays of approx 3-4 weeks. (Read Why) We try and get them sooner if possible.

Any Light requested with Longer cable will be made to order. ( Cables cannot be lengthened)

Security PIR for Outside Lights

We can offer a stand alone PIR unit that can be fitted along with any of our outside lights, it does not need to be fitted at the same point the light is mounted and can power more than 1 light. 

So the sensor can monitor the approach to  a drive and then turn on lights to the front and side walk if required.

These are a good specification with a 200 degree view and powers lights up to total 2000 watts or 225W LED, more than enough for lights around the outside!

Available in Black or White

Details:

This professional outdoor motion sensor is a stand-alone PIR unit with versatile mounting options to suit various installation requirements.

• Adjustable PIR head unit for optimum positioning. 
• Easy to install - with quick fix terminal block connection. 
• Mounting options for wall, ceiling or corner mounting.
• Dimensions (LxWxH): 133mm x 92mm x 60mm
• Maximum Lamp Wattage (W): 2000W 
• Incandescent or 1000W Fluorescent or 225W LED
• Operating Light Levels: Adjustable 2 - 2000lux
• Operating Time: User adjustable
• Min 3 seconds. Max 30 Minutes
• Detection Range: 12 metres @ 2.5 metres mounting height
• Detection Angle: 200° (Blanking strips provided)
• Head Adjustment: 90° left, 90° right, 50° downward
• IP Rating: IP55
• Manual Override: Yes. Auto, (auto reset after 6 hours)
• Detection range of up to 12m at 2.5m installation height.
• Automatic operation with a manual override option.
• Cable entry: Rear grommet
• Electrical Connections: 20A screw terminals - 4 PIN quick connector: N, L, L1, Earth
• Body & Base: Polycarbonate
• Class: Class l. Must be Earthed

Quayside Nautical Outdoor Wall Light  03-JDB018

Ask a Question about this product , we will try and get back to you within the day (Monday - Friday)