Outdoor Fisherman's Wall Light in SeaSpray

Outdoor Fisherman's Wall Light in SeaSpray This UK made wall light in aluminium powder coated in seaspray, a pale duck egg blue, is a striking way to light up the exterior of your home! This wall-mounted light comes with brass securing fittings, for that authentic fisherman's look. It can be used inside or outside; this is a super metal external light available in 2 sizes.

• Standard: 26 cm Dia over shade, 40 cm Top - Bottom, 40 cm Overhang 40 watt or LED option
• Large: 32cm diameter (over shade), 48 cm high (top of main light to bottom of glass dome), 42 cm overhang 60 watt or LED option
• Corner wall bracket is available.
• IP44, E27 (screw fitting)

Note: Requires fitting by electrician, as installations vary depending on location mounting screws and terminal blocks not supplied.

Matching pendant version available

Select the type of light bulb you would like: 

• Pearl LED bulbs are good for outdoor lights, and a 5 watt LED will give plenty of light for most walkways outside.
• If your light will only take a lower wattage, we will provide the correct version.
• Edison Antique are good for brass finished or decorative lights.
• Dimmable LED Bulbs need an LED dimmer

LED 6W Pearl E27 Bulb (>40 watt) Add to Basket:----------LED BULB:  Warm White:  + £4.90LED BULB:  Daylight:  + £4.90LED BULB:  Cool White:  + £4.90

Security PIR for Outside Lights

We can offer a stand alone PIR unit that can be fitted along with any of our outside lights, it does not need to be fitted at the same point the light is mounted and can power more than 1 light. So the sensor can monitor the approach to  a drive and then turn on lights to the front and side walk if required.

Another advantage of stand alone units is that should it fail (This is guaranteed for 3 years) you only need replace the sensor not the light!

These are a good specification 120° angle of coverage*, reach up to 10 m, and allows upto 500 watts of lighting  more than enough for lights around the outside!

Available in Black or White

High-tech. Low energy.
The IS 1 infrared motion detector is particularly reliable, can be mounted on the wall or ceiling and is the ideal solution for monitoring areas with precision targeting in front of buildings and on driveways. It also provides excellent quality of detection and can be tailored to the specific conditions on site. The detector is wired up so quickly and easily. 

Dimensions: Width: 50mm Height: 80mm Depth: 120mm

• Steinel (UK) Ltd Model - Movement sensor
• Sensor type - Passive infrared
• Detection angle - 120°
• Reach - 10 m max.
• Application - indoors and outdoors
• Installation - Wall/Ceiling
• Voltage - 230-240 V/50 Hz
• Output max. 500 W, max.
• Housing UV-resistant plastic.
• Capability of masking out individual segments - Yes
• Swivelling range - 60 °
• Tilting range - 180 °
• Teach-function for response value luminosity - No
• Time setting - 8 sec. - 35 min.
• Response value luminosity - 2-2000 lx
• Degree of protection - (IP) IP54
• Protection class II
• Temperature -20-50 °C

* If you need a 200° coverage and / or 12m detection - just add 200 in the customer comments when ordering, we will upgrade it FOC, Black or White.

Outdoor Fisherman's Wall Light in SeaSpray  03-FISH-W-SS

Ask a Question about this product , we will try and get back to you within the day (Monday - Friday)